產品概念
熱空氣循環烤箱由角鋼,不銹鋼板和冷鋼板{.製成,絕緣層充滿了高密度的鋁矽酸鹽棉,可確保烤箱的熱量保存和用戶的安全性.}可以在底部,頂部或智能上安裝加熱器,{2}}.}....米.
產品功能
1.熱空氣在烤箱中循環,高熱效率,節能.
2.使用強制通風,烤箱配備了氣管,材料均勻乾燥.
3.烤箱平穩運行.自動溫度控制,易於安裝和維護.
4.廣泛的應用,可以乾燥各種材料,是理想的一般乾燥設備.
工作原理
The air circulation system of the hot air circulation oven adopts the fan circulation air supply method, with even and efficient air circulation. The air source is driven by the circulating air supply motor (adopting non-contact switch) and the wind wheel is driven by the heater, and the hot air is sent out, and then through the air duct to the inner room of the oven, and then the air after use is sucked into the air duct to become the air source再次循環並加熱{.確保室內溫度.的均勻性,當溫度值由於門的打開和關閉而振盪時,空氣供應循環系統將迅速恢復操作,直到達到設定的溫度值.} .}



技術參數
1.加熱熱源:蒸汽,電力,遠紅外,電動蒸汽雙使用.
{2.溫度的使用:蒸汽加熱:50-140度,最高150度{.電力,遠紅外加熱溫度50-350度.} .
3.配備了自動控制系統和計算機控制系統.
4.常用的蒸汽壓力0.02-0.8 mpa(0.2-8 kgf/cm2).
5.根據I類型15kW配備電加熱,實用5-8 kW/h .
6.訂購時指示特殊要求.
7.溫度大於140度或小於60度的使用,以.的順序指定
8.工廠乾燥車,乾燥磁盤尺寸統一,可以互換.
9.盤大小:460×640×45
有關OT空氣循環烤箱的詳細信息和深入的技術信息,請聯繫我們的工程師,公司電話:025-85710008/ 85710818; nanjing zhuoding加熱設備co .,ltd .
熱門標籤: 熱空氣循環烤箱,中國熱空氣流通烤箱製造商,供應商,工廠


